ZW016 loose, tight type winding machine for the production of uniform density cylinder cylinder with loose type of yarn dyeing quality. The winding speed of the machine can be controlled automatically through the computer, up to 1100 M / min. The control of radial anti aliasing device is convenient. Advanced yarn clearing and tension mechanism with photoelectric yarn to avoid yarn winding. The precision and sensitivity of the device can be used to ensure that the length (weight) of the winding is uniform. It is an ideal equipment for yarn winding of cotton, hemp, silk and chemical fiber.
Main features:
The bobbin bracket center positioning structure
1 durable metal mandrel holder
2 easy to open bobbin bracket center positioning structure , easy to remove the bobbin winding.
3 the inlet and outlet of the yarn has ceramic protection, which can avoid the weight of the yarn due to friction.
4 groove tube with dust, anti winding device, can prevent the accumulation of dust, to protect the rotating bearing.
5 double-sided arrangement of spindle, each section 12 spindles, can be more than one series installation, up to 9 knots for a (108)
6 rotating pin type and weight type yarn brake freely controlling winding tension.
7 spring bracket pressure balancing device, can make the winding start to the end of the uniform winding density.
8 soft edge device, can make the loose type yarn more are dyeing.
9 Holzer component electronic length measuring device, to ensure that the number of spindles of the spindle is exactly the same.
* user set:
1. Special bobbin center positioning device for
2. diameter 95mm grooved drum for winding various yarn type 3. Self cleaning type electric yarn brake. Suspension type automatic air splicer. The empty bobbin recycling conveyor belt device
|
技術特點tec features |
絡筒機技術參數Technical parameters of winding machine |
|
松式槽筒loose tube |
O/D82mm，節距pitch2.5，對稱型symmetrical type ( 0°) |
|
緊式槽筒tight tube |
O/D82mm，節距pitch2.5，非對稱型asymmetrical type |
|
成型筒子 松式forming bobbin ( loose ) |
0°圓柱型cylindrical，或圓臺型round table3°30’，4°20’ |
|
成型筒子 緊式forming bobbin ( tight ) |
0°、3°30’、4°20’、5°57’、9°15’（僅限于膨脹錠子only expansion spindle） |
|
自動定長automatic length |
根據成品件，電子設定卷繞長度，最長可達999999米according to the product , it can set the winding yarn length , maximum length 999999 meter. |
|
配重式紗線制動器weight type yarn brake |
可防止紗線在喂入時出現抖動，提供合適卷繞張力prevent yarn jitter in feed, provide appropriate winding tension |
|
電動式上蠟裝置Electric waxing device |
可放入方孔蠟塊，并有重力片，每錠一套均勻上蠟put into square hole wax, and gravity, each spindle uniform waxing |
|
清結調節器cleaning regulator |
可方便調節清結刀門間隙it can rasy to cleaning and regulate the distance of knife gete. |
|
橫動軟邊traversing gear |
每節獨立電機驅動，橫動量可調each independent motor drive, the transverse momentum can be adjusted |
|
配置set |
每節12錠each section of 12 spindles |
|
組合combination |
最大10節連成一臺共120錠 max 10 sections connect 1 set 120 spindle |
|
驅動方式Drive mode |
每錠配一長軸變頻馬達，每面最多60錠，由1只變頻器控制Each spindle is equipped with a long axis variable frequency motor, with up to 60 spindles per side, and is controlled by 1 inverters. |
|
最高速度 max speed |
1100米/分鐘，每面卷繞均可獨立設置1100 M / min, each side can be set up independently |
|
導紗動程traverse range |
松式標配147mm兼有144mm, 154mm; 緊式標配152mm loose parts 147mm,also have 142mm. tight parts 152mm. |
|
紗架平衡器yarn stand balancer |
彈簧平衡調節卷繞壓力spring balance adjustment winding pressure |
|
紗線探測器yarn prober |
帶光學傳感器optical sensors |
|
筒紗最大直徑bobbin max diameter |
250mm |
|
啟動 / 停止并帶大按鈕開關ON/OFF button switch |
單錠薄膜開關控制，LED實時顯示卷繞米數，車頭液晶屏單面總控Single spindle film switch control, LED real-time display of the number of meters, the front side of the liquid crystal screen one side of the total control. |
|
徑向防疊裝置radial preventing stack |
電腦控制徑向防疊參數設定computer control radial preventing stack setting parameters |
|
往復吹吸清潔器round blowing and suction cleaner |
1100W(清潔器功率) power |
|
消耗功率power consumption |
90W/錠 (最高速度)，加清潔器電機功率90w/spindle(max speed), and cleaner power |
|
電源current source |
三相three-phase power 400V+/-10% , 50/60Hz |
|
12錠主機重量/尺寸 the weight /size of 12 spindles |
350kg 2110mm(長length)*950mm(寬wide)*1500mm(高high) |
|
吸塵器重量/尺寸the weight /size of cleaner |
125kg 根據錠數確定 according to the quantity of spindle |
|
車頭電控箱重量/尺寸 the weight /size of electric control bos |
45kg 700 mm(長length)*300mm(寬wide)*1320mm(高high) |
